Cabinet-Type All-in-One Inverter ESS (10kW/16kWh & 12kW/16kWh)
Model No.: PS-AIO-CB-10K-16K / PS-AIO-CB-12K-16K
The Cabinet-Type All-in-One Inverter ESS (10kW/16kWh & 12kW/16kWh) is an integrated energy storage solution designed for residential and small commercial applications. It combines a 10kW or 12kW solar hybrid inverter, a 16kWh LiFePO₄ battery system, BMS, and intelligent power management in a compact cabinet design.
The system supports solar PV charging, grid-connected operation, and backup power during grid outages. Featuring pure sine wave AC output, Wi-Fi monitoring, and UPS switching within 10ms, it provides a flexible and reliable solution for solar energy utilization, household energy storage, and essential power backup.
Key Features
– Cabinet-type all-in-one energy storage system integrating a 10kW or 12kW solar inverter, BMS and 16kWh LiFePO₄ battery
– Two available configurations: 10kW/16kWh and 12kW/16kWh
– Integrated solar hybrid inverter supporting PV charging and grid-connected operation
– Dual MPPT solar charging design, with a maximum combined PV input power of 16.5kW
– MPPT operating voltage range: 60–450Vdc
– Pure sine wave AC output with 10kW or 12kW inverter options
– UPS transfer time of less than 10ms
– Wi-Fi monitoring, LCD display and USB communication
– Stand-alone operation with optional parallel-operation version
– Suitable for residential energy storage, solar self-consumption, emergency backup and off-grid applications
Technical Specifications
| Technical Parameter | 10kW / 16kWh | 12kW / 16kWh |
|---|---|---|
| PV Input | ||
| Maximum PV Input Power | 16.5kW | 16.5kW |
| MPPT Configuration | MPPT 1: 9kW; MPPT 2: 7.5kW + 7.5kW | |
| Maximum PV Input Current | MPPT 1: 27A; MPPT 2: 22.5A + 22.5A | |
| PV Short-Circuit Current | 33A | |
| Maximum PV Open-Circuit Voltage | 500Vdc | |
| PV Start-up Voltage | 80Vdc | |
| MPPT Voltage Range | 60–450Vdc | |
| AC Input | ||
| Rated Input Voltage | 208 / 220 / 230 / 240Vac, L+N+PE | |
| Input Voltage Range | 90–280Vac (Normal Mode); 170–280Vac (UPS Mode) | |
| Input Frequency | 50 / 60Hz (Auto Adaptive) | |
| Maximum Bypass Input Current | 70A | |
| AC Output | ||
| Inverter Rated Power | 10kW | 12kW |
| Rated Output Voltage | 208 / 220 / 230 / 240Vac | |
| Output Frequency | 50 / 60Hz ±0.1% | |
| Output Waveform | Pure Sine Wave | |
| UPS Transfer Time | <10ms | |
| LiFePO₄ Battery | ||
| Battery Chemistry | LiFePO₄ | |
| Nominal Battery Voltage | 51.2Vdc | |
| Nominal Battery Energy | 16kWh | |
| Usable Energy (90% DOD) | 14.4kWh | |
| Maximum AC Charging Current | 160A | |
| Maximum PV Charging Current | 160A | |
| Maximum Combined Charging Current | 160A | |
| Maximum Discharge Current | 220A | |
| Battery Operating Voltage Range | 43.2–58.4Vdc | |
| General Data | ||
| Display | LCD | |
| Communication | USB | |
| Monitoring | Wi-Fi | |
| Ingress Protection | IP20 | |
| Operating Temperature | Charging: 0°C to +55°C; Discharging: -20°C to +55°C | |
| Relative Humidity | 5%–95% (Non-condensing) | |
| Maximum Operating Altitude | 4000m (Derating above 2000m) | |
| Operation Options | Stand-alone / Optional Parallel Version | |
| Dimensions & Weight | ||
| Product Dimensions (L × W × H) | 550 × 245 × 1230mm | |
| Package Dimensions (L × W × H) | 630 × 420 × 1314mm | |
| Net Weight | 151kg | |
| Gross Weight | 172kg | |
Specifications are based on the 12kW/16kWh reference model. The 10kW/16kWh version differs in rated inverter power. Other specifications are presented on the same basis and are subject to final model confirmation. Product specifications may change without prior notice. On mobile devices, swipe horizontally to view the complete table.
Applications
Residential Energy Storage
Designed for residential solar energy storage and backup power applications, the Cabinet-Type All-in-One Inverter ESS integrates a 10kW or 12kW solar inverter, 16kWh LiFePO₄ battery storage, BMS, and intelligent power management in a single cabinet.
The system provides reliable energy storage for household appliances, lighting, and essential electrical loads within its rated output capacity. Supporting solar PV charging and grid-connected operation, its integrated cabinet design helps simplify installation and improve household energy independence.
Emergency Backup Power
The Cabinet-Type All-in-One Inverter ESS provides reliable emergency backup power for essential household appliances, lighting, and electrical equipment during grid outages.
Available in 10kW and 12kW inverter configurations, both equipped with 16kWh LiFePO₄ battery storage, the system delivers pure sine wave AC output and supports UPS transfer times of less than 10ms, helping maintain power continuity for compatible electrical equipment.
Its integrated cabinet design makes it a practical backup power solution for residential and small commercial applications.
Solar-Powered Applications
Designed for solar-powered residential and off-grid applications, the Cabinet-Type All-in-One Inverter ESS integrates a 10kW or 12kW solar inverter, 16kWh LiFePO₄ battery storage, BMS, and intelligent power management in a single cabinet.
The system supports up to 16.5kW of PV input power, with dual MPPT configuration and an MPPT operating voltage range of 60–450Vdc, enabling efficient solar energy conversion and battery charging.
With its integrated design and optional parallel-operation version, the system provides a flexible solar energy storage solution for residential buildings, rural homes, and small commercial applications.
Off-Grid & Remote Power
Designed for off-grid and remote power applications, the Cabinet-Type All-in-One Inverter ESS provides a reliable energy solution for rural homes, cabins, farms, and locations with limited access to the electricity grid.
Available in two configurations—10kW / 16kWh and 12kW / 16kWh—the system integrates a pure sine wave solar inverter, LiFePO₄ battery storage, BMS, and intelligent power management in a single cabinet.
Supporting solar PV charging and stand-alone operation, the system delivers dependable power for household appliances, lighting, agricultural equipment, and other electrical loads within its rated output capacity. An optional parallel-operation version is also available for applications requiring system expansion.